Prepare the substrate
Ensure it is sound, clean, level and free from dust, oil, paint or loose material.
Measure clean water
Use the exact water quantity stated on the approved product data sheet.
Mix mechanically
Add powder to water and mix at low speed until smooth and lump-free.
Allow to mature
Observe the stated slaking time, then remix briefly without adding more water.
Apply correctly
Key the adhesive into the surface and comb in one direction with the correct notched trowel.
Fix and verify
Press tiles across the ridges, check transfer and remove fresh residue from joints and tools.
Draft technical content — verify against the approved TDS before publication.